Watlow LogicPro Instrukcja Użytkownika Pobierz pdf (Strona 51)

LogicPro User’s Guide Chapter 4: Resources

Doc.# 28002-00 Rev 3.00 Watlow Anafaze 35

To configure communications with the PPC-2000:

1. Select the correct Communication Port for your PC.

2. Select a Parity of Even, Odd or None.

3. In the Device Address field, enter the controller

address for the PPC-2000.

4. In the ROM Size field, enter 128kB. (Controllers with

2.03 and earlier firmware support up to 40 kB.

5. Select a Baud Rate. The PPC-2000 supports 9600 and

19200.

6. In the Time out field, enter 2000 milliseconds.

7. Click [OK]

-or-

Click [Cancel] to exit this screen.

CPC400 Attributes

The CPC400 has the following default communication

settings:

• Baud Rate: 19200

• Controller Address: 1

To configure communications with the CPC400:

1. Select the correct Communication Port for your PC.

2. Select a Parity of None.

3. In the Device Address field enter the controller

address you set in the CPC400.

4. In the ROM Size field, enter 64 kB.

5. Select a Baud Rate. The CPC400 supports 2400, 9600

and 19200.

6. In the Time out field enter 2000 milliseconds.

7. Click [OK]

-or-

Click [Cancel] to exit this screen.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 295 296

Brak uwag

Watlow LogicPro Instrukcja Użytkownika Strona 51